Sunday, January 9, 2011

Minimizing Welding Fume Inhalation

The world of welding can be a dangerous line of work. From the garb typically worn by welders, such a statement might seem like a forgone conclusion. However, the stuff you can't see is just as harmful as the sparks flying off the metal. 

During the welding process, toxic metal fumes are released into the air. While the composition of the fumes vary depending on the metals being welded, common contaminants emitted include nickel, chromium 6 and manganese. Nickel and chromium 6 are found in stainless steel and can cause asthma and cancer. Manganese is used to produce iron, steel and aluminum and has been found to cause Parkinson's Disease. Certain types of welding can also form harmful gases such as carbon monoxide, hydrogen fluoride and ozone.

Until fairly recently, the effects of welding fume exposure in the workplace wasn't given much attention. The story finally garnered national notice a few years ago when thousands of welders filed lawsuits against welding manufacturers, suppliers, and distributors alleging welding fumes were responsible for causing numerous health ailments. Heightened interest on the subject has prompted ongoing research. It has also incited the Occupational Safety and Health Administration (OSHA) to create federal welding ventilation standards.

While OHSA welding regulations limit the amount of gas and fume exposure allowed in the workplace, organizations such as the Center to Protect Workers' Rights (CPWR) contend the standards have become outdated and therefore are no longer effective. 

In addition to OSHA standards, the CPWR recommends employers use low fume-producing welding rods. Standard welding rods can generate up to 90 percent of emitted fumes. Using stick welding over flex core welding will also help reduce fume production in the workplace.

Weld Fume Collectors

As much as 95 percent of the particles produced by welding fumes are so small they are able to evade the human body's filtering system and enter the lungs. Welding fume collectors help minimize the amount of unseen particles entering the body by removing fumes and gases immediately upon their entry into the atmosphere; preventing harmful contaminants from entering a welder's breathing zone. Some fume collectors are equipped with nanofiber filters, which are capable of trapping these submicron particles and prevent contaminants from entering back into the atmosphere.

Fume collection systems have traditionally been mounted on a wall or installed in a specific location, limiting the mobility of the welder in the process. However, some welding fume extractor manufacturers now offer mobile units that allow welders to wheel their units anywhere within the workplace. 

Compared to other options, using a source capture fume extraction system is the best means of minimizing welding fume exposure in the workplace. For more information on welding fume removal, contact a fume collector manufacturer.

Read more: http://www.articlesnatch.com/Article/Minimizing-Welding-Fume-Inhalation-/1956394#ixzz1AYFxUHk9
Under Creative Commons License: Attribution No Derivatives

2 comments:

  1. Fume extractor manufacturers in Bangalore, India. Fume extraction system design is exextensively used for removal of fumes, mist, smoke, fine powder. Fume extractors which we manufacture can also be fitted with the self-balanced extractor arms of the varied lengths to provide with an extra flexibility in capturing the fumes.

    http://www.powertechpollutioncontrols.co.in/fume-extraction-system-design.php

    ReplyDelete
  2. Fume extraction requires any combination of air cleaning, air removal and air treatment. There are a variety of such products available. They range from free hanging fans and filter packages to full exhaust systems, downdraft tables, blowers, modular ventilation systems as well as portable units.

    ReplyDelete